In this article, we've gone over all of the Canon Printer Error Code 6A00 Solution you can utilise to figure out. If you're still having problems, the best choice is to seek help from Canon professionals. Canon is an electronics brand that offers a wide range of modern specifications as well as a variety of electronic devices such as computer printers, photocopiers, cameras, and camcorders. According to Canon Printer Error Code 6A00, there are difficulties with the Line Feed. Line feed is one of the methods for moving the print head down a single line. The issue continues when the Line Feed is dirty or sloppy.
The Methods to resolve Canon Printer Error Code 6A00.
The purge button on the printer equipment located on the right side, near the ink cartridges. When a team's print head becomes jammed, they are raised. Error Code 6A00 occurs when the device's printing mechanism fails, preventing you from printing and displaying the message Error Code 6A00 on the printer's display screen LCD. When the printer's cartridge mechanism becomes stuck, the problem remains and must be Canon Printer Error Code 6A00 Solution. According to the PIXMA service manual, an error in the AP motor remains throughout an exclusion operation. The following components are likely to be faulty:
Sheet-feeding machine
Purification unit
The logic board's assembly
It wasn't always necessary to replace them because they were broken. There may be straightforward concerns that can be remedied in a few simple actions. For further information, you can also contact Canon Printer Customer Service.
How to Fix Error 6A00 on Canon Printers
Step 1: Disconnect the printer's power cable feeder.
Step 2: Place the print head in the printer's centre and inspect the printer's right side from there.
Step 3: Remove any thing in the car that appears to be fluff or dirt with isopropyl alcohol.
Step 4: Check for any displaced parts of the printer as a result of the vibration.
Step5: If you have solid air on any desktop, use it to clean the printer and remove any lint that's causing it to malfunction.