attentools's blog

● High quality four-core wire heater
● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.

●Closed-loop and MCU zero crossing design for achieving fast heating-up, accurate and stable control.
●Knob control and LED display make work easy.
●High power diaphragm pump with high pressure make it suitable for various nozzles.
●Patented heater for obtaining fast heating-up and extending lifespan.
●Intelligence cooling system and deferred power-off function to extend hand piece lifespan。

●Closed-loop and MCU zero crossing design for achieving fast heating-up, accurate and stable control.
●Knob control and LED display make work easy.
●High power diaphragm pump with high pressure make it suitable for various nozzles.
●Patented heater for obtaining fast heating-up and extending lifespan.
●Intelligence cooling system and deferred power-off function to extend hand piece lifespan
https://www.atten.com/products/atten-at852d-hot-air-rework-station.html

MCU controlled temperature calibration with PID system equipped.
Imported heat-resistant materials heater with long life.
The heater using low voltage AC source to ensure the antistatic and no leakage, no interference.
Steady temperature setting with 200～480℃.
Rapid heating-up.
Automatic standby, auto-sleep to save energy.
Legerity handle suitable for long time operation.
Unique temperature locks setting to avoid adjusting temperature.
Using split design, easy to place.

Highly compatible features, compatible with various type of soldering tools, a machine serves several purposes.
Built- in vacuum suction pump.
Max Power is 150W.
Big silicone buttons operate comfortable and reliable.
All kinds of parameter data and information in the form of graphics display with its large graphic display.
Can automatically recognize the soldering tools that you connected and upload the corresponding parameters.
Provide quick three groups preset temperature parameters to simplify operations.

LCD display making parameters monitorable and system setting easier.
Pluggable design making handle and heater change easier.
Equip with vacuum suction pen, components can be extracted after desoldering.
Installed brushless fan, air volume can reach 120 l/min.
1000W high power heating core make it heating up fast to reach the specified temperature.
PID algorithm controlled temperature accurate and stable.
Support timing/manual heating mode
Password protecting function make parameter setting with permission.

Highly compatible features, compatible with various type of soldering tools, a machine serves several purposes.
Single channel power max support to 150W, whole machine power max support to 200W.
Two output channels can work at the same time.
Big silicone buttons operate comfortable and reliable.
All kinds of parameter data and information in the form of graphics display with its large graphic display.
Can automatically recognize the soldering tools that you connected and upload the corresponding parameters.

Closed-loop and MCU zero crossing design for achieving fast heating-up, accurate and stable control.
LED screen used to display working temperatures and working states make operations easy.
Embedded sensor inside iron hand piece to obtain auto-sleep to save energy.
Intelligence cooling system and deferred power-off function to extend hot air gun lifespan.
Compact unit to save workbench space and eye-pleasing appearance.
Intelligent malfunction detection and indications.

Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons (1, 2, 3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.

MCU controlled temperature calibration with PID system equipped.
Imported heat-resistant materials heater with long life.
The heater using low voltage AC source to ensure the antistatic and no leakage, no interference.
Steady temperature setting with 200～480℃.
Rapid heating-up.
Automatic standby, auto-sleep to save energy.
Legerity handle suitable for long time operation.
Unique temperature locks setting to avoid adjusting temperature.
Using split design, easy to place.