You are here

Atten AT938D 60W Digital & Lead-free Soldering Station

ztwesc's picture
Submitted by ztwesc on Mon, 03/25/2019 - 08:25

Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons (1, 2, 3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.
Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost. http://www.freewing-model.com

Specifications: Packing list: Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 25x21x13.4(cm)
Power:60W Handle set : 1 PCS N.W.: 1.79kg
Heater Voltage:24VAC Iron stand: 1 PCS G.W.: 2.03kg
Temperature range:150~450°C AC cord: 1 PCS Carton: 12 PCS/Carton
Temperature offset range:±50°C Manual: 1 Copy Size: 51.5x44x43(cm)
Temperature stability:±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 24.4kg
Setting method:adjust by buttons G.W.: 25.6kg
Temperature calibration:digital
Heater:60W dual-core ceramic heater
Tip-to-ground impedance:< 2Ω
Tip-to-ground voltage:< 2mV

http://www.soldering-iron.com