Can Ortur Laser Master 3 Engrave Metal?
Ortur laser engravers are capable of permanently marking nearly any type of bare metal. Fiber laser lines are designed to combine affordability with high-quality results. The Ortur Laser Master 3 machine has a laser output power of 10w, which can cut 12mm wood board and 10mm acrylic board at one time. Revolutionary for an open laser engraver, marking metal over large work areas in a short time. You can buy Ortur Laser Master 3 or Ortur Laser Master 2 and other laser engraving machines at the best price at HTPOW.
And CO2 laser systems are primarily designed to engrave and cut non-metallic materials, but the Ortur Laser Master 3 uses upgraded laser modules, 0.01 mm accuracy - engrave narrow edges with ease, but they can also be used to mark on metal with the help of metal marking compounds.
Since the Ortur uses a 10w laser, the beam will clearly mark both the coated metal and the raw metal, but our system is not very well suited for metal-cutting applications. Our fiber laser systems may be compatible with cutting some thin metals, as we have seen thin foils cut successfully with our fiber lasers, up to 0.012 inches.
Do I Need Separate Laser Machines for Engraving and Cutting?
No, a laser machine does everything! Ortur's laser systems will engrave and cut most metallic and non-metallic materials, as well as engrave coated metals. For information on which materials you can engrave and cut, visit our materials page.
The laser can be set to engrave only (raster mode), cut only (vector mode), or it can do both in a combination mode. The laser knows which parts to engrave and which to cut based on line width, which is easy to set up in your graphic design software.
Interested in a safe laser cutting and engraving system? If you have any questions about the use of laser engraving machines, you can discuss your needs with experienced HTPOW customer service!