You are here

causes of noise in Vacuum Dust Collectors electromagnetic pulse valve principle

Submitted by sales on Tue, 12/20/2022 - 21:43

The electromagnetic pulse valve is the power of the motor as the power of the opening and closed valve. It is used for a large valve. The electric valve. The electric valve has the advantages of easy assembly, low failure rate, and the advantages of the industry's automation needs. It is a cost -effective choice.

The general theory of Capes of Noise in Vacuum Dust Collection is: when the valve body stops loading, the pressure gas is quickly filled with the valve through the damping hole. Gas power is high, the membrane can reliably close the blow port of the valve, and the pulse valve stops blowing. The electrical signal is in millisecond time, and the moment when the pulse valve is turned on, a powerful impact airflow is generated, thereby achieving instant spray blowing. The valve is to control the opening and closing of the valve body unloading pores according to the electrical signal. When the valve body is removed, the stress gas emissions in the rear cavity of the valve cavity, the internal pressure gas in the front cavity of the valve is influenza in the film, the film is lifted, and the membrane is lifted. Starting, the pulse valve is sprayed.

causes of noise in vacuum dust collectors is the power of the motor as the power of the opening valve. It is used for a large valve and the electric valve, which can be used for traffic control in the process.

The electric valve has the advantages of easy assembly, low failure rate, and the advantages of the industry's automation, which is a cost -effective choice. Because the general traditional pneumatic valve is used, it is inevitable that there must be piping, solenoid valve, and compressor to match, and the electric valve is driven by a motor, which is easy to install and save. the costing payment. In addition, the disadvantages of the opening and closing of the motor driven and closing are relatively smooth, and there is no instantaneous impulse. The failure rate can be greatly reduced. Many people think that the electric valve is expensive and the cost of use is high. The price of many accessories and pipelines does not dominate the price, but it must bear more maintenance costs. Therefore, the prospects of the electric valve are relatively broad.

causes of noise in vacuum dust collectors https://www.kaisenfilter.com/Do-you-know-the-precautions-for-using-indus...