In order to maintain the aesthetic quality of your aerating fountain in the pond, you must maintain it properly so that it functions properly. It is beneficial to have knowledge of how a fountain functions so that you can prevent it from clogging. This is particularly true for fountains with decorative spraying patterns, as these designs with tiny slots and small holes can be more vulnerable to clogging.
Reasons for clogging
How does an aerating fountain get clogged? Since fountains have a motor unit attached to a float below the water surface and the impeller forces the water through the Fountain Nozzle. They are protected by a screen that keeps out any debris coming around the motor shaft and getting stuck in the nozzle. The large force of water is pushing the debris despite the intake screen.
The intake screen afterwhen clogged with debris does not allow the water to pass between the screen, resulting in cavitation. The fountain patterngets affected as a result and candamage the motorover time. If the motor breaks or gets damaged, then the repairs areexpensive.However, one can prevent the fountains from clogging and save costly repairs.
How to prevent Fountains from clogging?
You can take many preventive measures to stop the fountain from clogging. Many Water Fountain Nozzle Types manufacturers provide an additional screen that surrounds the motor unit and protects against debris. These larger screens are better barriers and stop debris more effectively, thus allowing only water to pass. The supplemental screen is especiallyuseful for fountains with decorative patterns as itcan preventthe smaller debris from squeezing through the slots and holes of the nozzle.
Another way is to set the timer function that comes with fountains. The timer on the control panel can be set in such a way that the fountain is switched for a few hours at night. This will allow the accumulated debris to fall off the large screen and reduce clogging when the fountain starts the next day.
Types of debris that cause fountains to clog
The most common types of debris that clogs pondfountainsare:
- Leaves
- Grass
- Aquatic vegetation
- Trash
- Mulch
- Pine needles
Among these, trash, especially plastic bags, causes the most clogging.The growth of filamentous algae and aquatic plants is also a common nuisance for clogging. Clogging is often caused by the source of water. Many ponds are located near stormwater runoff.
Removing trash periodically from ponds and keeping a close watch on littering go a long way in keeping the pond clean. Many ponds develop aquatic vegetation overtime. They can be removed by professionals using algaecides and herbicides.
Fountain maintenance
Operating a fountainis relatively carefree and easy. However, they must be protected from external elements as any damage will affect your investment, andrepairs are costly. Preventive maintenance fromfountain experts such as FuraatBustaan can take care of any clogging issues.