A Simple Setup Guide For Rockspace Extender?

This guide is about how to connect the range extender to the wifi networks. Just by login into the Rockspace WiFi range extender, you can configure the extender's settings. If you don't know how to log in to the Rockspace range extender, this article will come in handy.
Verify With The Rockspace Requirements
Initially, you must have both the extender as well as router available.
Other than that, the ID and password for the Rockspace extender login to reach the login dashboard.
It might be on the box or beneath the device. If you change your password, enter the latest one.
Also, browsers that you use on your PC or mobile device.
Configuration Of Rockspace Range Extender
The below-given list will help you configure the rockspace range extender easily. You need not worry as the login and setup both are very easy.
The WPS Approach
First, attach the plug to the outlet, and turn it on. After that, wait for the LED to become blue. Ensure that the extender and WiFi router is in the same room.
Once the LED light on the router turns blue, press the WPS button. Wait for the router signal's LED light to turn blue.
Now, push the WPS button on the extender within two minutes of activating the WPS button on the router.
Without interrupting the power supply, you can now take the extender to its new location. But, check if there is enough space between both devices.
Setting Up an Ethernet Cable
To begin with, connect your PC and WiFi extender together using an Ethernet cable.
Now, on your device's web browser, go to the Rockspace extender login page. Enter the rockspace web/IP address into the address bar of your web browser.
Thereafter, a login page will appear. Enter the login credentials from the Rockspace WiFi extender's box. After logging in, you will get to the Rockspace WiFi extender setup portal.
To proceed further, choose the options to log in to the extender.
Now, if you follow the on-screen instructions, you will see the steps on how to set up the WiFi extender. At this point, you can install the WiFi extender by following the on-screen directions.
To make the final changes click on the save button.
After this, relocate the extender. Disconnect the range extender before moving it.
The Rockspace range extender should be put halfway between your WiFi router and the locations with dead network connections.
In the end, after hooking in the extender, connect your device to it.
Connect Your Device Wirelessly
To connect the Rockspace Range Extender, follow the points listed below.
First, link the extender to your computer or smartphone
Here, you can wirelessly link your extender to your PC or mobile device.
Then next, navigate to the "rockspace ext" WiFi network on your PC or mobile device.
In the end, part connects the WiFi networks quickly.
Change The Network’s Settings
After connecting your device to the WiFi network, launch your web browser.
In your web browser, type rockspace extender Login. A login page should be ready now. If re.rockspace local is not working, then power cycle your device and try again.
Now, enter your details into the login form by successfully entering the username and password.
You will reach the dashboard of the Rockspace Extender.
From there, you can easily adjust the settings of the network you're using.
You can instantly change advanced settings, such as its name, password, and security encryption.
Rockspace Extender Not Working Issues
There might be some changes in the home network or misconfiguration, the Rockspace extender may stop working. Various reasons are there why a Rockspace extender does not operate and cannot connect to the home network.
The Extender Has No Signal Light
Though, if you don't see a solid signal light on the extender, it's no longer in connection with the router. It happens when you change the router configuration, update the firmware, or change the WiFi password.
A Red Light Illuminates The Rockspace Extender
Mostly, a red light on the extender indicates a connectivity issue. Mostly, it happens when your Rockspace extender can not get a WiFi signal from the main router. If the router and the extender are facing a number of obstructions.
Link them to extend your wireless network. The larger distance can be a big reason. Check the directions and make sure the extender is in the right position.
Examine your extender's WiFi channel settings.
To increase the number of channels switch to the auto mode.
To make the performance of the router good, upgrade the extender with new firmware.
In the end, we just want to take small feedback, as your Rockspace Device is now working well after this procedure. However, if it is not, then contact our experts.